پرتال دانشگاهی کشور پرتال دانشگاهی کشور
University Portal of Iran

کلمات مرتبط

    نتایج کارشناسی ارشد 95 نتایج ارشد 95 دفترچه کارشناسی ارشد دانشگاه آزاد امریه سربازی استخدام تامین اجتماعی استخدام شرکت نفت استخدام آموزش و پرورش استخدام بانک پذیرش بدون کنکور منابع کارشناسی ارشد منابع دکتری استخدام شهرداری آگهی استخدام پليس استخدام نیروی انتظامی لیست همایش های بین المللی لیست سمینار لیست کنفرانس سالن همایش مقاله ISI دانشگاه پيام نور استخدام بانک پاسارگاد سازمان سما استخدام بانک شهر استخدام بانک گردشگری آگهی استخدام بانک صادرات استخدام بانک پارسیان پودمانی علمی کاربردی 95 استخدام دولتی استخدام استانداری استخدام آتش نشانی استخدام وزارت نيرو استخدام ديپلم استخدام برنامه نویس استخدام حسابدار نمونه سئوالات کارشناسی ارشد نمونه سئوالات دکتری ارزشیابی مدرک دانشگاه پیام نور فراگير دانشپذير مدرک دیپلم مدرک کارشناسی انتخاب رشته کنکور سراسری 95 عدح.هق daneshgah پردیس دانشگاهی شهریه دانشگاهها آگهی استخدام تهران azad karshenasi arshad kardani peyvasteh azmoon konkoor mba مجازی mba یکساله مدرک mba
مجموعه  اخبار دانشگاهی کشور / اخبار دانشگاهارسال شده در   27 شهریور 1392 - 18 September 2013

بیوگرافی دکتر حمید میرزاده گزینه ریاست دانشگاه آزاد ایران


استاد (پایه 37)      Ph.D, M.Sc., B.Sc.
 
1-    اطلاعات شخصی:


•    متاهل - کد ملی 3070920543
•    استاد دانشکدۀ مهندسی پلیمر و دانشکده  مهندسی پزشکی  دانشگاه‌ صنعتی ‌امیرکبیر.
•    استاد وابسته  دانشگاه علوم پزشکی تهران
•    H index: 22 (Scopus)
                  محل کار :
تهران ، خیابان حافظ، شماره 424، دانشگاه صنعتی امیر کبیر (پلی تکنیک تهران)، دانشکده مهندسی پلیمر
 صندوق پستی 4413-15875     کدپستی 34311- 15916
تلفن: 64542420            تلفن/دورنگار:   66492877  همراه : 09121113012
پست اکترونیک:  mirzadeh@aut.ac.ir  یا mh11365@gmail.com    
سایت : http://polymer.aut.ac.ir/autcms/res/upload//polymer-engineering/mirzadeh/Mirzadeh%20.pdf


2-      سوابق تحصیلی:


کارشناسی ارشد، طراحی‌ و‌ساخت‌کامپوزیت‌ها بر پایه ‌پلی‌استر‌ و ‌الیاف‌کنف، دانشگاه صنعتی امیرکبیر، ایران 1357.
دکتری تخصصی، بررسی‌ زیست‌سازگاری‌ الاستومر‌ EPR پیوند‌خورده ‌با‌هیدروژل‌ها به ‌کمک‌ اشعۀ لیزر، دانشگاه نیوساوت ویلز(UNSW) ‌استرالیا، 1373.

3-      سوابق اجرایی و مدیریتی  :
•    فرماندار سیرجان:  1360-1359
•    استاندارکرمان : 1364- 1360
•    معاون اجرایی نخست وزیر:  1368-1364
•    معاون اجرایی رئیس جمهور: 1374 – 1368
•    معاون رئیس جمهور و رئیس سازمان برنامه و بودجه: 1376-1374
•    دبیر و عضو هیات موسس دانشگاه آزاد اسلامی1386 تا کنون.
•    عضو هیات امنا مرکزی دانشگاه آزاد اسلامی1386 تا کنون.


4-      سوابق علمی، آموزشی و پژوهشی:


عضو هیات علمی دانشگاه کرمان1358-1373.
استاد دانشگاه صنعتی امیر کبیر، 1373تا کنون.
استاد وابسته دانشگاه علوم پزشکی تهران 1390 تا کنون
عضو هیات علمی پژوهشگاه پلیمر وپتروشیمی ایران، 1389- 1373
4-1  فعالیت‌های آموزشی:
تدریس 19 واحد درسی در دانشکده‌های مهندسی پزشکی و مهندسی پلیمر دانشگاه صنعتی امیرکبیر و پژوهشگاه پلیمر و پتروشیمی ایران و دانشگاه علوم پزشکی تهران  ( مهندسی بافت) برای دوره‌های کارشناسی، کارشناسی ارشد ودکتری شامل:
•    مهندسی بافت، 3 واحد.
•    پلیمرها در پزشکی، 3 واحد.
•    مبحث زیست سازگاری، 3واحد.
•    روش‌های اصلاح سطوح پلیمرها، 3 واحد.
•    روش‌های نوین برای آنالیز سطوح بیوماتریال‌ها، 3 واحد.
•    لیزر در پزشکی 2 واحد
•    روشهای اصلاح پلیمرها 2 واحد



4- 2 – جوایز و افتخارات :


•    برنده جایزه جشنواره بین المللی خوارزمی سال 1373
•    برنده جایزه جشنواره بین المللی رازی سال1382
•    پژوهشگر نمونه دانشگاه صنعتی امیر کبیر، 1383.
•    پژوهشگر نمونه پژوهشگاه پلیمر وپتروشیمی ایران، 1384.
•    برگزیده بعنوان بهترین سخنران، سمینار بین المللیISPST 2005  تهران، دانشگاه صنعتی امیرکبیر، مهرماه 1384.
•    برگزیده بعنوان مدیر پژوهشی برتر مؤسسات پژوهشی کشور، هفتمین جشنواره پژوهش و فناوری، 1385.
•    برنده جایزه جشنواره بین المللی رازی سال 1386
•    دریافت لوح تقدیر  بعنوان موسس پژوهشگاه پلیمر و پتروشیمی ایران از هیات امنائ پژوهشگاه  و وزیر علوم و تحقیقات وفناوری سال 1385
•    دریافت لوح تقدیر بعنوان مدیر مسئول ژورنال برتر با نمایه بین المللی 1386
•    پژوهشگر نمونه پژوهشگاه پلیمر وپتروشیمی ایران 1387.
•    استاد نمونه کشوری1387.
•    دریافت لوح سپاس آموزش و جامعه  - دانشگاه صنعتی امیر کبیر- 1391
•    منتخب برتر دهمین جشنواره ملی ایده های برتر- تهران هفته پژوهش و فناوری آذر ماه 1391
•    پژوهشگر برتر در زمینه مهندسی زیستی   –  منتخب رئیس ستاد توسعه زیست فناوری ریاست جمهوری و پژوهشگاه ملی مهندسی ژنتیک و زیست فناوری اسفند 1391

4-3 - زمینه تخصصی:


•    مهندسی بافت.( پوست، غضروف و استخوان)
•    مبحث زیست‌سازگاری.
•    پلیمرهای زیست‌سازگار.
•    اصلاح خواص سطحی و آنالیز سطوح بیوماتریال‌ها و نانوساختارهای پلیمری

4-4-  فعالیت های پژوهشی


اجرای 70 پروژه پژوهشی به عنوان استاد راهنما یا اجرای طرح مستقل پژوهشی از جمله :
•    طرح ملی تولید پلیمرهای زیست‌سازگار با اشعه لیزر که برای اولین بار در ایران وجهان انجام شد و مقالات منتشره از این طرح مورد مراجعه جامعه علمی جهانی قرار گرفته است. محل اجرای طرح پژوهشگاه پلیمر و پتروشیمی ایران.(برنده جایزه جشنواره بین المللی خوارزمی سال 1373).
•    طرح ملی حلزون شنوائی (برنده جایزه جشنواره بین المللی رازی سال1382) نتایج این طرح در آمریکاواروپا  ثبت اختراع شده است.  
•    طرح ملی طراحی وساخت چسب طبی زیست سازگارو زیست تخریب پذیر که نتایج آن به تایید وزارت بهداشت ودرمان ج.ا.ا رسیده است.
•    طراحی و ساخت غشاء پلی سولفونی برای کاربرد در دیالیز کلیه(برنده جایزه جشنواره بین المللی رازی سال 1385) 
•    طراحی وساخت ظروف کشت سلولی (برنده جایزه جشنواره بین المللی رازی سال 1386)
•    اجرای طرح پوشش  الکترود رهاینده داروی ضد التهاب Corticosteroid))، حلزونی شنوایی به سفارش شرکت اتریشی MED-EL با گرانت 93000 دلار، نتایج این طرح در آمریکا ثبت اختراع شده است (شروع سال1386) فاز 1. 
•    اجرای طرح پوشش الکترود رهاینده داروی ضد التهاب Corticosteroid))، حلزونی شنوایی به سفارش شرکت اتریشی MED-EL با گرانت 96000 یورو، این طرح در دست اجراست (شروع سال1387) فاز2.
•    طرح ساخت پوشش های زخم بر پایه بیو کامپوزیتهای پلیمری  که در بیمارستان شهدای تجریش روی بیماران سوختگی و سالک و زخم پای دیابتی در بخش پوست آن بیمارستان استفاده و مورد تایید قرار گرفته است و نمونه اینکار پژوهشی اخیرا به شرح زیر ثبت اختراع بین المللی شده است: 
 (Us Patent:PUB. NO. US2011/0218472 A1 Sep. 8 2011)
•    اجرای طرح پژوهشی " طراحی و ساخت نیمه صنعتی پانسمان های پلیمری زیست تخریب پذیر بر پایه کیتوسان برای درمان سوختگی ها" صندوق حمایت از پژوهشگران کشور(طرح شماره:89001749 )
•    طراحی و ساخت داربست های نوین نانوساختار بر پایه پلیمرهای طبیعی جهت درمان زخمهای دیابتی با استفاده از روش الکتروریسندگی نانوالیاف  (صندوق حمایت از پژوهشگران کشور) – همکار طرح.
•    در حال حاضراستاد راهنمای 9 پروژه دکتری یا کارشناسی ارشد هستم که در دست اجراست که جزییات مراتب مذکور و  بقیه فعالیت های پژوهشی اینجانب ذیلا در قسمت  4-8 در صفحه 32این بیوگرافی آورده شده است.

4-5    -  سوابق وخدمات علمی- پژوهشی:


•    موسس مرکز تحقیقات پلیمر ایران (پژوهشگاه پلیمر وپتروشیمی ایران)1364.
•    موسس شهرک‌های تحقیقاتی پژوهش (تهران)1364 و کاوش (کرج)1369.
•    موسس مرکز رشد فناوری پلیمر1381.
•    مدیر مسئول وسردبیر Progress in Biomaterials  ناشر Springer از 2011 تا کنون
•    مدیر مسئول و عضو هیئت تحریریه مجله علوم و تکنولوژی پلیمر از سال  1367 تا1390
•    مدیر مسئول و سردبیر Iranian polymer Journal از سال 1373 تا1390 (این مجله به عنوان مجله علمی پژوهشی برتر کشور که در JCR توسط موسسه اطلاعات علمی isi نمایه نویسی می‌شود در جشنواره پژوهش وفناوری سال1385 انتخاب شد).
•    رئیس انجمن پلیمر ایران از 1376  تا کنون ( 6 دوره از 7 دوره).
•    عضو هیئت علمی دانشکده‌های مهندسی پلیمر و مهندسی پزشکی، دانشگاه صنعتی امیرکبیر1373 تاکنون .موسس و مسئول آزمایشگاه لیزر پلیمر در سازمان انرژی اتمی ایران (1369 تا 1387).
•    موسس و مسئول آزمایشگاه مهندسی بافت در دانشکده مهندسی پزشکی دانشگاه صنعتی امیرکبیر (1373 تا 1388).
•    موسس و مسئول آزمایشگاه بیوپلیمر در دانشکده مهندسی پلیمر دانشگاه صنعتی امیر کبیر (1373 تا کنون).
•    مدیر گروه بیوماتریال پژوهشگاه پلیمر ایران از مرداد 1373 تا شهریور 1378.
•    رئیس پژوهشگاه پلیمر و پتروشیمی ایران از مرداد 1378 تا مرداد 1389.
•    عضو انجمن بیوماتریال آمریکا  (Society for Biomaterials) از سال 2000 تا کنون.
•    عضو انجمن شیمی و مهندسی شیمی ایران1372 تا کنون ..
•    عضو انجمن سامانه‌های نوین دارورسانی ایران 1383 تا کنون .
•    عضو هیئت تحریریه مجله بین المللی Artificial Organs, John Wiley  ازسال 2008 تا کنون .
•    عضو هیئت تحریریه فصل نامه علمی پژوهشی لیزر در پزشکی (Laser in Medicine) از سال 2010 تا کنون .
•    عضو هیئت تحریریه مجله بین المللی انجمن شیمی ایران (  (JICSاز سال 2005 تاکنون.
•    عضو کمیتۀ علمی و رئیس کمیته میان گروهی صندوق حمایت از پژوهشگران کشور- ریاست جمهوری1383-1391 .
•    عضو هیئت امناء پژوهشگاه استاندارد ایران 1384-1389 .

4-6- داور مقالات علمی برای ژور نالهای ملی و بین المللی به شرح زیر : 
1.    Artificial Organs, Official Journal of ISAO, INFA and ISRP Published by Blackwell.
2.    Journal Biochimica et Biophysica Acta (BBA - Biomembranes) Published by Elsevier.
3.    Journal of Applied Polymer Science (English), Published by John Wiley & Sons, Inc.
4.    Iranian Polymer Journal (English), Published by IPPI Press.
5.    Biomacromolecules, Published by ACS Publications.
6.    Iranian Journal of Chemical Engineering; (English), Published by the Iranian Association of Chemical Engineers (IACHE).
7.    Iranian Journal of Polymer Science &Technology (Persian), Published by the Iran Polymer Society.
8.    Iranian Journal of Chemistry& Chemical Engineering (English& Persian), Published by the Jahad Daneshgahi.
9.    Journal of Iranian Medical Engineering Society, (Persian).
10.    Journal of the Iranian Chemical Society (JICS), Published by Iranian Chemical Society (English).
11.    Carbohydrate Polymers, Published by Elsevier.
12.    Journal of Biomedical Materials research, PartA, Published by John Wiley.
13.    Green Chemistry Letters and Reviews, Published by Taylor and Francis.
14.    Journal of Nanomaterials, Hindawi Publishing Corporation.
15.    Journal of Biomaterials Applications, published by Sage publications.
16.    Materials Science and Engineering C, published by Elsevier.
17.    ACS Applied Materials & Interfaces, ACS publication.
18.    European Journal of Medicinal Chemistry, published by Elsevier.
19.    Journal of Industrial and Engineering Chemistry, published by Elsevier.

4-7- آثار منتشر شده:
الف) مقالات در مجلات با نمایه های بین المللی:
1.    Mohammad A. Semsarzadeh, Abdol R. Lotfali and Hamid Mirzadeh, Jute Reinforced Polyester Structures, Polymer Composites, 5 (2) 141-142, 1984.
2.    Mohammad A. Semsarzadeh, Hamid Mirzadeh and Abdol R. Lotfali, Unsaturated Polyester Resin Bulk Reinforcing by Jute Fibers, Iranian Journal of Polymer Science and Technology, 2 (2) 94-97, 1989.
3.    Hamid Mirzadeh, A.A. Katbab, R.P. Burford, CO2 – Pulsed Laser Induced Surface Grafting of Acrylamide onto Ethylene-Propylene Rubber (EPR), Part I, Radiation Physics and Chemistry, 41 (3) 507-519, 1993.
4.    Hamid Mirzadeh, A.A. Katbab, R.P. Burford, CO2 – Pulsed Laser Induced Surface Grafting of Acrylamide onto Ethylene-Propylene Rubber (EPR), Part II, Radiation Physics and Chemistry, 42 (1-3) 53-56, 1993.
5.    Hamid Mirzadeh, M.T. Khorasani, A.A. Katbab, R.P. Burford, Surface Modification of EPR as Biomaterial by Laser Induced Graft Copolymerization of AAm, HEMA, NVP, I: AAm, Iranian Journal of Polymer Science and Technology, 6 (1) 4-16, 1993.
6.    Hamid Mirzadeh, A.A. Katbab, M.T. Khorasani, R.P. Burford, CO2 – Laser Induced Surface Grafting of HEMA and NVP onto Ethylene-Propylene Rubber as Biocompatible Material, Angewandte Makromolekulare Chemie, 218 () 23-40, 1994. 
7.    Hamid Mirzadeh, M.T. Khorasani, A.A. Katbab, R.P. Burford , Z. Soheili, A. Golestani, B. Goliaei, Biocompatibility Evaluation of Laser Induced AAm and HEMA Grafted EPR: I-in vitro Study, Clinical Materials, 16 (4) 177-187, 1994.
8.    Hamid Mirzadeh, A.A. Katbab, M.T. Khorasani, R.P. Burford, Surface Modification of EPR as Biomaterial by Laser Induced Graft Copolymerization of Aam, HEMA and NVP: II-HEMA and NVP, Iranian Journal of Polymer Science and Technology, 7 (3) 160-173, 1994.
9.    Hamid Mirzadeh, A.A. Katbab, R.P. Burford, CO2 – Laser Graft Copolymerization of HEMA and NVP onto Ethylene-Propylene Rubber (EPR) as Biomaterial- (III), Radiation Physics and Chemistry, 46 (4-6) 859-862, 1995.
10.    Hamid Mirzadeh, A.A. Katbab, M.T. Khorasani, R.P. Burford , E. Gorgin, A. Golestani, Cell Attachment to Laser Induced AAm- and HEMA-Grafted Ethylene–Propylene Rubber as Biomaterial: in vivo Study, Biomaterials, 16 (8) 641- 648, 1995.
11.    Mohammad Khorasani, Hamid Mitzadeh and Peter Sammes, PDMS Surface Modification by Laser Irradiation: A Novel Technique for the Preparation of Blood Compatible Polymers, Iranian Journal of Polymer Science and Technology, 8 (2) 77-86, 1995. 
12.    Hamid Mirzadeh, Ahmad-Reza Ekbatani and Ali-Asghar Katbab, Surface Modification of Ethylene Propylene Rubber by Laser Grafting of Acrylic Acid, Iranian Polymer Journal, 5 (4) 225-230, 1996.
13.    Mohammad Khorasani, Hamid Mitzadeh and Peter Sammesl, Laser Induced Surface Modification of PDMS as a Super- hydrophobic Material, Radiation Physics and Chemistry, 47 (6) 881-888, 1996.
14.    H. Mirzadeh, The Present Status of Iran’s Natural Gas Industry and its Importance in Country’s Future Development Programming, Iranian Journal of Polymer Science and Technology, 9 (2) 121-128, 1996.
15.    Hamid Mirzadeh and N.Zargham, Report on the Global Knowledge’ 97, Knowledge for Development in the Information Age, Rahyaft, 16 (summer & autumn), 153-156, 1997.
16.    Mohammad Khorasani, Hamid Mitzadeh and Peter Sammes, Polydimethylsiloxane Surface Modification by Laser Irradiation: A Novel Technique for the Preparation of Blood Compatible Materials, Surface Modification Technologies X, the Institute of materials, London, T.S. Sudarshan (Ed.), pp. 499-507, 1997.
17.    Hamid Mitzadeh, Mohammad Khorasani and Peter Sammes, Laser Surface Modification of Polymers: A Novel Technique for the Preparation of Blood Compatible Materials- (II) in vitro Assay, Iranian Polymer Journal,7 (1) 5-13, 1998.
18.    M. Rezai Darvishi, Hamid Mirzadeh and M. Mehrabzadeh, Preparation and Investigation of Physical and Mechanical Properties of Biocompatible Blend Based on PDMS/PHEMA, Iranian Journal of Polymer Science and Technology, 11 (3) 155-162, 1998.
19.    M. T. Khorasania, Hamid Mirzadeh and P. G. Sammes, Laser Surface Modification of Polymers to Improve Biocompatibility: HEMA Grafted PDMS, in vitro Assay-III, Radiation Physics and Chemistry, 55 (5-6) 685-689, 1999.
20.    Mahrokh Dadsetan, Hamid Mirzadeh, Naser Sharifi-Sanjani, Effect of CO2 Laser Radiation on the Surface Properties of Polyethylene Terephthalate, Radiation Physics and Chemistry, 56 (5-6) 597-604, 1999.
21.    Mahrokh Dadsetan, Hamid Mirzadeh, Naser Sharifi-Sanjani, Evaluation of the Excimer and CO2 Laser Effects on the Surface Properties of Polyethylene Terephthalate, Iranian Journal of Polymer Science and Technology, 12 (1) 3-12, 1999.
22.    Mahrokh Dadsetan, Hamid Mirzadeh, Naser Sharifi-Sanjani and Pirouz Salehian, IR Laser Surface Modification of Polyethylene Terephthalate as Biomaterial, Processing and Fabrication of Advanced Materials VIII, Singapore, 221-229, 1999.
23.    Mahrokh Dadsetan, Hamid Mirzadeh, Naser Sharifi-Sanjani, Surface Modification of PET by CO2 Laser Graft Copolymerization of Acrylamide, Journal of Applied Polymer Science, 76 (3) 401-407, 2000.
24.    Hamid Mirzadeh, M. Ali Mohagheghi, Hossein Ahrnadi, Hamid Mirkhani, Saeed Amanpour and Pirooz Salehian, Cartilage Tissue Engineering for Ear as in Rabbit Model with Perforated Polyurethane: In-vivo Assay, Iranian Polymer Journal, 9 (2) 73-80, 2000.
25.    N. Sheikh, A.A. Katbab and Hamid Mirzadeh, Isocyanate-Terminated Urethane Prepolymer as Bioadhesive Material: Synthesis and Characterization, International Journal of Adhesion & Adhesives, 20 (4) 299-304, 2000.
26.    Fateme Shokrolahi, Hamid Mirzadeh and M. T. Khorasania, Determination of Crosslinking Density of Polydimethylsiloxane Network by Calorimetry and its Comparison with Equilibrium Swelling Method, Iranian Journal of Polymer Science and Technology, 12 (4) 221-227, 2000.
27.    M.R. Jafari, Hamid Mirzadeh, Y. Eslami and H. Amini, Manufacturing of a Polymeric Ocular Prosthesis for Therapy of Glaucoma, Iranian Journal of Polymer Science and Technology, 13 (1) 3-11, 2000.
28.    Mahrokh Dadsetan, Hamid Mirzadeh and Naser Sharifi-Sanjani, IR Laser Surface Modification of Polyethylene Terephthalate as a Biomaterial, Iranian Polymer Journal, 9 (4) 203-210, 2000.
29.    N. Sheikh, Hamid Mirzadeh, A.A. Katbab, P. Salehian, M. Daliri , S. Amanpour, Isocyanate-terminated Urethane Prepolymer as Bioadhesive Material: Evaluation of Bioadhesion and Biocompatibility, in vitro and in vivo assays, Journal of Biomaterials Science, Polymer Edition, 12 (7) 707-734, 2001.
30.    M. Dadsetan, Hamid Mirzadeh, N. Sharifi-Sanjani and P. Salehian, in vitro Studies of Platelet Adhesion on the Laser Treated Polyethylene Terephthalate Surface, Journal of Biomedical Materials Research, 54 (4) 540-546, 2001.
31.    M Dadsetan, Hamid Mirzadeh, N. Sharifi-Sanjani and M. Daliri, Cell Behavior on Laser Surface- Modified PET in vitro, Journal of Biomedical Materials Research, 57 (2) 183-189, 2001.
32.    Nasrin Sheikh, Hamid Mirzadeh and Ali Akbar Katbab, Reactive Ester –Urethane Prepolymer as Bioadhesive: Synthesis and Evaluation, Iranian Polymer Journal, 10 (1) 3-7, 2001.
33.    Oleg Olegovich Nikolaev, Vladislav Borisovich Urhanov, Vladislav Pavlovich Britov, Alexander Dmitrievich Babaev, Valeri Vladimirovich Bogdanov and Hamid Mirzadeh, A thermoplastic Rubber Composition for Medical Purposes, Iranian Polymer Journal, 10 (1) 9-14, 2001 .
34.    Farhang Abbasi, Hamid Mirzadeh and Ali-Asgar Katbab, Modification of Polysiloxane Polymers for Biomedical Applications: A Review, Polymer International, 50 (12) 1279-1287, 2001. 
35.    Majid Ghiass, Bahram Dabir, Manouchehr Nikazar, Alejandro D. Rey and Hamid Mirzadeh, Monte Carlo Simulation of Non-Linear Free Radical Polymerization Using a Percolation Kinetic Gelation Model (I): Free Radical Homopolymerization, Iranian Polymer Journal, 10 (5) 305-313, 2001.
36.    F. Abbasi, Hamid Mirzadeh and A. A. Katbab, Sequential Interpenetrating Polymer Networks of Poly (2-hydroxyethyl methacrylate) and Polydimethylsiloxane, Journal of Applied Polymer Science, 85 (9) 1825-1813, 2002.
37.    F. Abbasi, Hamid Mirzadeh and A. A. Katbab, Comparison of Viscoelastic Properties of PDMS/PHEMA IPN’s with Their Physical Blends, Journal of Applied Polymer Science, 86 (14) 3480-3485, 2002.
38.    Hamid Mirzadeh, M. Dadsetan and N. Sharifi-Sanjani, Platelet Adhesion on Laser Induced Acrylic Acid Grafted Polyethylene Terephthalate, Journal of Applied Polymer Science, 86 (13) 3191-3196, 2002.
39.    Nakisa Yaghobi, Hamid Mirzadeh and Farzin Hormozi, Optimization of Chitin Isolation from Shrimp Shells: Study of Parameters influence on Chitin Deacetylation Reaction and Biocompatibility Evaluation (in vitro), Iranian Journal of Polymer Science and Technology, 15 (1)55-63, 2002.
40.    Hamid Mirzadeh, Nakisa Yaghobi, Saeed Amanpour, Hossein Ahmadi, M. Ali Mohagheghi and Farzin Hormozi, Preparation of Chitosan Derived from Shrimp’s Shell of Persian Gulf as a Blood Hemostasis Agent: in vivo, Iranian Polymer Journal, 11 (1) 63-68, 2002.
41.    S. Kheirandish, E. Jabbari and Hamid Mirzadeh, et.al, Effect of Hydrogel content on Properties of a Composites Based on RTV Silicone Rubber on Matrix and Crosslinked Poly (acrylic acid) Particles as the Dispersed Phase, Iranian Journal of Polymer Science and Technology, 15 (1) 13-21, 2002.
42.    Farhang Abbasi, Hamid Mirzadeh and Ali-Asgar Katbab, Bulk and Surface Modification of Silicon Rubber for Biomedical Applications, Polymer International, 51 (10) 882-888, 2002.
43.    Hamid Mirzadeh, Fateme Shokrolahi and Morteza Daliri, Effect of Silicone Rubber Crosslink Density on Fibroblast Cells Behavior: in vitro, Journal of Biomedical Materials Research, 67A (3) 727-732, 2003.
44.    D. Fallahi, Hamid Mirzadeh and M. T. Khorasani, Physical, Mechanical and Biocompatibility Evaluation of Three Different Types of Silicone Rubber, Journal of Applied Polymer Science, 88 (10) 2522–2529, 2003.
45.    Hamid Mirzadeh and M. Dadsetan, Influence of Laser Surface Modifying of Polyethylene Terephthalate on Fibroblast Cell Adhesion, Radiation Physics and Chemistry, 67 (3-4) 381-385, 2003.
46.    S. Bahram Bahrami, Soheila S. Kordestani, Hamid Mirzadeh and Parvin Mansoori, Poly vinyl alcohol /Chitosan Blends: Preparation, Mechanical and Physical Properties, Iranian Polymer Journal, 12 (2) 139-146, 2003.
47.    Hassan Arabi, Hamid Mirzadeh, Seyed Hossein Ahmadi and Saeed Amanpour, Coating of Polyester Fabric with Graphite Composition to Produce Thrombo-Resistant Vascular Grafts Part 1: Coating Technique and in vitro Study, Iranian Polymer Journal, 12 (2) 147-152, 2003.
48.    F. Abbasi and Hamid Mirzadeh, Properties of Poly(dimethylsiloxane)/Hydrogel Multicomponent Systems, Journal of Polymer Science Part B: Polymer Physics, 41 (18) 2145-2156, 2003.
49.    M.T. Khorasani, B. Sadatnia And Hamid Mirzadeh, Evaluation of Effective Parameters on Cooling Period in Cryoaccumulator Gels, Iranian Journal of Polymer Science and Technology, 15 (6) 387-394, 2003.
50.    GH.R. Bakhshandeh, Hamid Mirzadeh, M.T. Khorasani, F. Abbasi, F. Shokr Elahi And A. Parvin, Manufacture and Investigation of Mechanical Properties and Blood Compatibility of Silicone O-Ring Used in Dialyzers, Iranian Journal of Polymer Science & Technology, 16 (1) 41-49, 2003.
51.    M.T. Khorasani, Hamid Mirzadeh and Z. Kermani, Surface Modification of Silicone Elastomer to Increase Hydrophobicity, Iranian Journal of Polymer Science and Technology, 16 (3) 175-181, 2003.
52.    H. Arabi, Hamid Mirzadeh, S.H. Ahmadi, S. Amanpour, S. Rabbani, A. Abdi, In vitro and in vivo Hemocompatibility evaluation of Graphite Coated Polyester Vascular Grafts, The International Journal of Artificial Organs, 27 (8) 691-698, 2004.
53.    Nakisa Yaghobi and Hamid Mirzadeh, Enhancement of Chitin’s Degree of Deacetylatin Using Multi-Stage Alkali Treatment, Iranian Polymer Journal, 13 (2) 131-136, 2004.
54.    F. Abbasi and Hamid Mirzadeh, Adhesion between modified and unmodified poly(dimethylsiloxane) layers for a biomedical application , International Journal of Adhesion & Adhesives, 24 (3) 247-257, 2004.
55.    M. T. Khorasani and Hamid Mirzadeh, In vitro Blood compatibility of Modified PDMS Surfaces as a Superhdrophobic and Superhydrophilic Materials, Journal of Applied Polymer Science, 91 (3) 2042-2047, 2004.
56.    Hamid Mirzadeh and F. Abbasi, Segmented Detachable Structure Cochlear Implants’ Electrodes for Close-Hugging Engagement with the Modiolus; Journal of Biomedical Materials Research, B, Applied Biomaterials, 15 68(2) 191-198, 2004. 
57.    R. Ghavamzadeh, V. Haddadi-Asl and Hamid Mirzadeh, Bioadhesion and Biocompatibility Evaluation of Gelatin and Polyacrylic Acid as a Crosslinked Hydrogel: in vitro, Journal of Biomaterials Science, Polymer Edition, 15 (8) 1019-1031, 2004.
58.    M.T. Khorasani and Hamid Mirzadeh, BHK Cells Behaviour on Laser Treated PDMS Surfaces, Colloids and Surfaces, an International Journal B: Biointerfaces, 35 (1) 67-71, 2004.
59.    J. Barzin, S. S. Madaeni, Hamid Mirzadeh, M. Mehrabzadeh, Effect of Polyvinylpyrrolidone on Morphology and Performance of Hemodialysis Membrane Prepared from Polytether Sulfone, Journal of Applied Polymer Science, 92 (6) 3804–3813, 2004.
60.    Jalal Barzin, C. Feng, K.C. Khulbe, T. Matsuura, S.S. Madaeni and Hamid Mirzadeh, Characterization of Heat Treated PES-PVP Hemodialysis Membrane by Ultrafiltration and Atomic Force Microscopy, Journal of Membrane Science, 237 () 77-85, 2004.
61.    M. T. Khorasani and Hamid Mirzadeh, Laser Surface Modification of Silicone Rubber to Reduce Platelet Adhesion, Journal of Biomaterials Science, Polymer Edition, 15 (1) 59-72, 2005. 
62.    Jalal Barzin, S. Siavash Madaeni and Hamid Mirzadeh, Effect of Preparation Conditions on Morphology and Performance of Hemodialysis Memberanes Prepared from Polyether Sulfone (PES) and Polyvinyl Pyrrolidone (PVP), Iranian Polymer Journal, 14 (4) 353-360, 2005.
63.    S. Amanpour, H. Ahamadi, Hamid Mirzadeh, M.A. Mohagheghi and S. Rabbani, Long Term Evaluation of Laser-Treated Silicone (LTS) Membrane as a Pericardial Substitute: In Vivo Study, Journal of Long-Term Effects of Medical Implants, 15 (4) 347-353, 2005.
64.    M.T. Khorasani, Hamid Mirzadeh and Z. Kermani, Wettability of Porous PDMS Surface: Morphology Study, Applied Surface Science, 242 (3-4) 339-345, 2005. 
65.    MT Khorasani, M Zaghiyan and Hamid Mirzadeh, Ultra High Molecular Weight Polyethylene and Polydimethylsiloxane Blends as Acetabular Cup material ,Colloids and Surfaces, an International Journal B: Biointerfaces, 41 (2-3) 169-174,  2005.
66.    Saeid Karbasi, Hamid Mirzadeh, Fariba Orang and Jill P.G. Urban, et.al, A Comparison Between Cell Viability of Chondrocytes on a Polyurethane Biodegradable Scaffold and Alginate Beads in Different Oxygen Tension and pH, Iranian Polymer Journal, 14 (9) 823-830, 2005.
67.    M. Khakpour, A. Jamshidi, A. A. Entezami and Hamid Mirzadeh, et.al, HPTLC Procedure for Determination of Levonogestrel in Drug Release Media of an In – situ Forming Delivery System , Journal of Planner Chromatography- Modern- TLC (JPC), 104 (18) 331-334, 2005.
68.    S. Karbasi, Hamid Mirzadeh and F. Orang, Evaluation of Physical Environment on Chondrocytes Cells Metabolism Seeded on a Biodegradable Polyesterurethane Scaffold for Articular Cartilage Tissue Engineering , Iranian Journal of Polymer Science and Technology, 18 (6) 383-390, 2005.
69.    T. Dolatabadi Farahani , E. Vasheghani Faraahani And Hamid Mirzadeh, Swelling Behavior of Alginate-N, O-Carboxymethyl Chitosan Gel Beads Coated by Chitosan, Iranian Polymer Journal, 15 405-415 , 2006.
70.    F. Abbasi , Hamid Mirzadeh and M. Simjoo, Hydrophilic Interpenetrating Polymer Networks of Polydimethyl siloxane (PDMS) as Biomaterial for Cochlear Implants, Journal of Biomaterials Science. Polymer Edition, 17 (3), 247-368, 2006.
71.    Yasser Ghazizadeh, Hamid Mirzadeh, Saeed Amanpour, Hossien Ahmadi and Shahram Rabbani, Investigation of Effectiveness of Chitosan Hydrogel to Stop Bleeding and Air Leakage from Lung Fistula: In Vivo Study, Iranian Polymer Journal, 15 (10) 821-828, 2006.
72.    M.T. Khorasani, S. MoemenBellah, Hamid Mirzadeh and B. Sadatnia, Effect of surface Charge and Hydrophobicity of Polyurethane and Silicone Rubbers on L929 Cells Response, Colloids and Surfaces, an International Journal B: Biointerfaces, 51 (2) 112-119, 2006.
73.    Shadab Bagheri, Hamid Mirzadeh, Effect of Radio Frequency Plasma on Polystyrene Surface Properties, Iranian Journal of Polymer Science and Technology, 19 (5) 395-402, 2006.
74.    E. Takácsa, Hamid Mirzadeh, L. Wojnárovits, J. Borsac, M. Mirzataheri and N. Benke, Comparison of Simultaneous and Pre-irradiation Grafting of N-vinylpyrrolidone to Cotton–Cellulose, Nuclear Instruments and Methods in Physics Research Section B ( NIMB Journal), 265 (1) 217-220, 2007.
75.    A. Karkhaneh, Hamid Mirzadeh and A. R. Ghaffariyeh, Simultaneous Graft Copolymerization of 2-Hydroxyethyl Methacrylate and Acrylic Acid onto PolydimethylSiloxane Surfaces Using a Two-Step Plasma Treatment (TSPT), Journal of Applied Polymer Science, 105 (4) 2208-2217, 2007.
76.    H Mojgan Zandi, Hamid Mirzadeh and Christian Mayer, Early Stages of Gelation in Gelatin Solution Detected by Dynamic Oscillating Rheology and Nuclear Magnetic Spectroscopy, European Polymer Journal, 43 (4) 1480–1486, 2007.
77.    Mohammad Imani, Shahriar Sharifi, Hamid Mirzadeh and Farshid Ziaee, Monitoring of PEG-Diacrylate-based Hydrogel Formation by Real Time NMR Spectroscopy, Iranian Polymer Journal, 16 (1) 13-20, 2007.
78.    A. Toloe, Hamid Mirzadeh, F. Moztarzadeh, M. T. Khorasani, S. Amanpour, R. Moradi, Biological Evaluation of PDMS /HA and PDMS / β-TCP Composites Used for Fabrication of Acetabular Cup in Hip Joint Prosthesis: in vitro and in vivo, Amirkabir Journal of Science and Technology, (EBS) 17 (65-A) 19-26, Fall 2006- Winter, 2007.
79.    Yousef Mohammadi, Hamid Mirzadeh, Fathollah Moztarzadeh, Masoud Soleimani and Esmaiel Jabbari, Osteogenic Differentiation of Mesenchymal Stem Cells on Novel Three-Dimensional PLLA/Chitosan/Gelatin/beta-Tricalcium Phosphate Hybrid Scaffolds, Iranian Polymer Journal, 16 (1) 57-69, 2007.
80.    H. Mirzadeh and Sh. Bagheri, Comparison of the Effect of Excimer Laser Irradiation and RF Plasma Treatment on Polystyrene Surface, Radiation Physics and Chemistry, 76 (8-9) 1435-1440, 2007.
81.    M.T. Khorasani and H. Mirzadeh, Effect of Oxygen Plasma Treatment on Surface Charge and Wettability of PVC Blood Bag—In vitro Assay, Radiation Physics and Chemistry,76 (6) 1011-1016, 2007.
82.    Kourosh Kabiri, Hamid Mirzadeh and Mohammad J. Zohuriaan- Mehr, Highly Rapid Preparation of Bio-nanoclay with Chitosan, Iranian Polymer Journal, 16 (3) 147-151, 2007. 
83.    S. Mojtaba Taghizadeh, Hamid Mirzadeh, Mehdi Barikani and Maryam Yousefi, The Effect of Poly(vinylpyrrolidone) Concentration on Peel Strength of Acrylic/PVP Pressure Sensitive Adhesive Blends, Iranian Polymer Journal, 16 (4) 297-285, 2007. 
84.    Mohammad Rafienia, Hamid Mirzadeh, Hamid Mobedi and Ahmad Jamshidi, In Vitro Evaluation of Drug Solubility and Gamma Irradiation on the Release of Betamethasone under Simulated In Vivo Conditions, Journal of Bioactive and Compatible Polymers, 22 (4) 443-459, 2007.
85.    Yousef Mohammadi, Hamid Mirzadeh, Elah Moztarzadeh Fath, Masoud Soleymani,E. Jabari, Design and Fabrication of Biodegradable Porous Chitosan/Gelatin/ Tricalcium Phosphate Hybrid Scaffolds for Tissue Engineering, Iranian Journal of Polymer Science and Technology, 20 (3) 297-308, 2007.
86.    MB Eslaminejad, Hamid Mirzadeh, Y Mohamadi and A. Nickmahzar, Bone Differentiation of the Marrow-derived Mesenchymal Stem Cells Using Beta- tricalcium Phosphate/Alginate/Gelatin Hybrid Scaffolds, Journal of Tissue Engineering and Regenerative Medicine, 1 (6) 417–424, 2007.
87.    Mojgan Zandi, Hamid Mirzadeh and Christian Mayer, Effect of Temperature and pH on Chain Mobility of Gelatin during Early Stages of Gelation, Iranian Polymer Journal, 16 (12) 1-10, 2007.
88.    R.A. Mahdinavaz Aghdam, Hamid Mirzadeh ,M. Daliri ,A. Zare, Evaluation of E-Coli Adhesion onto KrF and CO2 Laser- Treated PET: in vitro, Iranian Journal of Biomedical Engineering, 1 (1) 19-28, 2007.
89.    K. Kabiri, H. Mirzadeh and M. J. Zohuriaan-Mehr, Undesirable Effects of Heating on Hydrogels, Journal of Applied Polymer Science, 110 (6) 3420–3430, 2008.
90.    A. Parvin, H. Mirzadeh and M. T. Khorasani, Physico-Chemical and Biological Evaluation of Plasma-Induced Graft Polymerization of Acrylamide onto Polydimethylsiloxane, Journal of Applied Polymer Science, 107 (4) 2343–2349, 2008.
91.    Sharifi S, Hamid Mirzadeh, Imani M, Atai M, Ziaee F, et.al, Photopolymerization and shrinkage kinetics of in situ crosslinkable N-vinyl-pyrrolidone/poly(-caprolactone fumarate) networks, Journal of Biomedical Materials Research Part A, 84 (2) 545-556, 2008.
92.    M.T. Khorasani, Hamid Mirzadeh and S. Irani, Plasma Surface Modification of Poly(L-lactic acid) and Poly(lactic-co-glycolic acid) Films for Improvement of Nerve Cells Adhesion, Radiation Physics and Chemistry, 77 (3) 280-287, 2008.
93.    Hamid Keshvari, Hamid Mirzadeh, Parvin Mansoori, Fariba Orang and Mohammad T Khorasani, Collagen Immobilization onto Acrylic Acid Laser-grafted Silicone: In Vitro, Iranian Polymer Journal, 17 (3) 1-11, 2008.
94.    Azadeh S. Hashemi Doulabi, Shahriar Sharifi, Hamid Mirzadeh, Mohammad Imani, Mohammad Atai and Shahram Mehdipour-Ataei, Synthesis and Preparation of Biodegradable and Visible Light Crosslinkable Unsaturated Fumarate-based Networks for Biomedical Applications, Polymers for Advenced  Technologies, 19 (9) 1199- 1208, 2008.
95.    S. Mojtaba Taghizadeha, Hamid Mirzadeh, Mehdi Barikania and Maryam Yousefia, Miscibility and tack of blends of poly(vinylpyrrolidone)/acrylic pressure sensitive adhesive, International Journal of Adhesion and Adhesives, 29 (3) 302-308, 2008.
96.    E. Nejatia, Hamid Mirzadeh and M. Zandi, Synthesis and Characterization of Nano-hydroxyapatite Rods/poly(L-lactide acid)Composite Scaffolds for Bone Tissue Engineering, Composites: Part A 39 (10) 1589–1596, 2008.
97.    Shahriar Sharifi, Hamid Mirzadeh, Mohammad Imani, Farshid Ziaee, Maryam Tajabadi,  Ahmad Jamshidi and Mohammad Atai, Synthesis, Photocrosslinking Characteristics and Biocompatibility Evaluation of N-vinyl pyrrolidone /polycaprolactone FumarateBiomaterials Using a New Proton Scavenger, Polymers for Advance Technologies, 19 (12) 1828-1838, 2008.
98.    H. Keshvari,Hamid Mirzadeh ,Parvin Mansouri And A.R. Zare Shahneh , Study of Fibroblast Cell Behavior on the Acrylic Acid CO2 Pulsed Laser Grafted Silicone Elastomer for Tissue Engineering Applications, Lasers in Medicine,5, 22-29, 2008.
99.    Jaber Emami, Hamed Hamishehkar, Abdolhossien Rouholamini Najafabadi, Kambiz Gilani, Mohsen Minaiyan, Hamid Mahdavi, Hamid Mirzadeh, Amir Fakhari and Ali Nokhodchi, Particle Size Design of PLGA Microspheres for Potential Pulmonary Drug Delivery Using Response Surface Methodology, Journal of Microencapsulation, Journal of Microencapsulation, 26 (1) 1–8, 2009.
100.    Eslaminejad MB, Hamid Mirzadeh, Nickmahzar A, Mohamadi Y and Mivehchi H., Synthesis, Characterization and Biocompatibility of Novel Injectable,Biodegradable and In Situ Crosslinkable Polycarbonate-based Macromers, Journal of Biomedical Materials Research Part A, 90 (2)830-843, 2009.
101.    M.B. Eslaminejad, Hamid Mirzadeh, A. Nickmahzar, Y. Mohamadi, H. Mivehchi, Type I Collagen Gel in Seeding Medium Improves Murine Mesencymal Stem Cell Loading Onto the Scaffold Increases Their Subsequent Proliferation, and Enhances Culture Mineralization, J Biomedical Materials Research Part B: Applied  Biomaterials , 90 (2) 659–667, 2009.
102.    Taghizadeh SM, Soroushnia A, Hamid Mirzadeh and Barikani M., Preparation and In Vitro Evaluation of a New Fentanyl Patch Based on Acrylic/Silicone Pressure Sensitive Adhesive Blends, Drug Development and Industrial Pharmacy, 35 (4) 487-498, 2009.
103.    Sharifi S, Hamid Mirzadeh, Imani M, Rong Z, Jamshidi A, Shokrgozar M, Atai M and Roohpour N., Injectable In situ Forming Drug Delivery System based on Poly(epsilon –Caprolactone Fumarate for Tamoxifen Citrate Delivery:Gelation Characteristics, In vitro Drug Release and Anti-Cancer Evaluation, Acta Biomaterialia, 5 (6) 1966–1978, 2009.
104.    Kourosh Kabiri, Hamid Mirzadeh, Mohammad J Zohuriaan-Mehr and Morteza Daliri, Chitosan-modified Nanoclay-poly(AMPS) Nanocomposite Hydrogels with Improved Gel Strength, Polymer International, 58 (11) 1252-1259, 2009.
105.    Z. Mohamadnia, E. Ahmadi, M. Rafienia, Hamid Mirzadeh and H. Mobedi, Investigation of Drug Release and 1H-NMR Analysis of the in situ Forming Systems Based on Poly(lactide-co-glycolide), Polymers for Advanced Technologies, 20 (1) 48–57, 2009.
106.    Mohammad Rafienia, Shahriar H. Emami, Hamid Mirzadeh, Hamid Mobedi and  Saeed Karbasi, Influence of Poly (Lactide-Co-Glycolide) Type and Gamma Irradiation on the Betamethasone Acetate Release from the In Situ Forming Systems, Current Drug Delivery, 6 (2) 184-191, 2009.
107.    Ali Talebi, M.T. Khorasani, Hamid Mirzadeh, Fabrication of Porous Scaffolds from Poly(D,L-lactic acid) by Liquid-Liquid Phase Separation, Iranian Journal of Polymer Science and Technology, 21 (6) 495-501, 2009.
108.    Saeid Amanpour, Atefeh Solouk, Hamid Mirzadeh, Mohammad-Ali Mohagheghi, Shahram Rabbani and Farokh Tirgari, In Vitro and In Vivo Assays of Cartilage Repair by Perforated Polyurethane Scaffold, Iranian Polymer Journal 19 (6) 403 -415, 2010.
109.    Shahram Rabbani, Abbas Rabbani, Mohammad Ali Mohagheghi, Hamid Mirzadeh, Saeed Amanpour, Abbas Alibakhshi, Maryam Sotoudeh Anvari and Yasser Ghazizadeh, A Novel Approach for Repairing of Intestinal Fistula Using Chitosan Hydrogel, Journal of Biomaterials Applications, 24 , 545-553, 2010.
110.    Hamid Mahdavi, Hamid Mirzadeh, Hamed Hamishehkar, Ahmad Jamshidi, Amir Fakhari, Jaber Emami, Abdolhossien Najafabadi, Kambiz Rouholamini Gilani, Mohsen Minaiyan, Mahnaz Najafi, Maryam Tajarod, and Ali Nokhodchi, The Effect of Process Parameters on the Size and Morphology of Poly (D,L-Lactide-Co-Glycolide) Micro/Nanoparticles Prepared by an Oil in Oil Emulsion/Solvent Evaporation Technique, Journal of Applied polymer science, 116 (1) 528–534, 2010.
111.    Kabiri, K., Hamid Mirzadeh and Zohuriaan-Mehr, M. J., Chitosan Modified MMT-Poly(AMPS) Nanocomposite Hydrogel :Heating Effect on Swelling and Rheological Behavior, Journal of Applied Polymer Science, 116 (5) 2548-2556, 2010.
112.    Jolly C, Garnham C, Hamid Mirzadeh, Truy E, Martini A, Kiefer J and Braun S., Electrode Features for Hearing Preservation and Drug Delivery Strategies, Adv Otorhinolaryngol. 67, 28–42, 2010.
113.    Zandi M, Hamid Mirzadeh, Mayer C, Urch H, Eslaminejad MB, Bagheri F and Mivehchi H, Biocompatibility Evaluation of Nano-rod Hydroxyapatite/Gelatin Coated with Nano-Hap as a Novel Scaffold Using Mesenchymal Stem Cells, Journal of Biomedical Materials Research Part A, 92 (4), 1244-1255, 2010.
114.    K. Kabiri, M. J. Zohuriaan-Mehr, Hamid Mirzadeh and M. Kheirabadi, Solvent-, ion- and pH- Specific Swelling of Poly(2-acrylamido-2- methylpropane sulfonic acid ) Superabsorbing Gels, Journal of Polymer Research, 17 (2) 203-212, 2010.
115.    Farahmand Ghavi F, Hamid Mirzadeh, Imani M, Jolly C and Farhadi M, Corticosteroid Releasing Cochlear Implant: A Novel Hybrid of Biomaterial and Drug Delivery System, Journal of Biomedical Materials Research Part B: Applied Biomaterials, 94B (2) 388– 398, 2010.
116.    Elmi A, Kajbafzadeh AM, Sadeghi Z, Tanhaeivash R and Hamid Mirzadeh, Biodegradable Mini Plate and Screw: A Secure Method for Internal Fixation of Symphysis Pubis in Animal Model of Pubic Diastasis, Urology, 75 (3) 676-683, 2010.
117.    Shokrollahi P, Hamid Mirzadeh, Scherman O and Huck WT., Biological and Mechanical Properties of Novel Composites Based on Supramolecular Polycaprolactone and Functionalized Hydroxyapatite, J Biomed Mater Res.Part A, 95A (1): 209–221, 2010.
118.    Shadab Bagheri-Khoulenjani, Mohammad Etrati-Khosroshahi and Hamid Mirzadeh, Particle Size and Distribution Modeling of  Nanohydroxyapatite-in-gelatin Nanocomposite Microspheres by Surface Response Method, Iranian Polymer Journal, 19 (10) 743- 755, 2010.
119.    Parvin Shokrollahi, Hamid Mirzadeh, Wilhelm T.S. Huck and Oren A. Scherman, Effect of Self Complementary Motifs on Phase Compatibility and Material Properties in Blends of Supramolecular, Polymers, 51, 6303-6312, 2010.
120.    Atefeh Solouk, Mehran Solati-Hashjin, Siamak Najarian, Hamid Mirzadeh and Alexander M Seifalian, Optimization of Acrylic Acid Grafting onto POSS-PCU Nanocomposite Using Response Surface Methodology, Iranian Polymer Journal 20 (2), 91-107, 2011.
121.    Akbar Karkhaneh, Hamid Mirzadeh, Alireza Ghaffariyeh, Abdolali Ebrahimi, Nazafarin Honarpisheh, Masud Hosseinzadeh and Mohammad Hossein Heidari, Novel Materials to Enhance Corneal Epithelial Cell Migration on Keratoprosthesis, British Journal of Ophthalmology 95(3):405-409, 2011.
122.    S. Bagheri-Khoulenjani1, Hamid Mirzadeh, M. Etrati-Khosroshahi, Chitosan and Nanohydroxyapatite Roles in Physical and Chemical Characteristics of Gelatin/Chitosan/Nanohydroxyapatite Microspheres, Iranian Journal of Polymer Science and Technology, 23 (6) 487-498, 2011.
123.    Mojtaba Koosha, Yousef Jahani and Hamid Mirzadeh, The Effect of Electron Beam Irradiation on Dynamic Shear Rheological Behavior of a Poly (propylene-co-ethylene) Heterophasic Copolymer, Polymers for Advanced Technologies, 22 (12),  2039-2043, 2011.
124.    Atefeh Solouk, Brian Cousins, Hamid Mirzadeh, Mehran Solati-Hashjin, Siamak Najarian and Alexander Seifalian, , Surface Modification of POSS-nanocomposite Biomaterials Using Reactive Oxygen Plasma Treatment for Cardiovascular Surgical Implant Applications, Biotechnology and Applied Biochemistry, 58 (3) 147–161, 2011.
125.    Hamid Mirzadeh, Ehsan Vahedi-Moghadam and Hoori Mivehchi, Laser Modified Nanostructures of PET Films and Cell Behavior, Journal of Biomedical Materials Research: Part A, 98A (1) 63–71, 2011.
126.    Atefeh Solouk, Hamid Mirzadeh, Mohammad Ali Shokrgozar, Mehran Solati-Hashjin, Siamak Najarian and Alexander M. Seifalian, The Study of Collagen Immobilization on a Novel Nanocomposite to Enhance Cell Adhesion and Growth, Iranian Biomedical Journal, 15 (1 & 2): 6-14 (April & January), 2011.
127.    Shokrolahi, Fatameh ,  Hamid Mirzadeh, Hamid Yeganeh and Morteza Daliri, Fabrication of Poly(urethane urea)-based Scaffolds for Bone Tissue Engineering by the Combined Strategy of Using Compression Moulding and Particulate Leaching Methods, Iranian Polymer Journal, 20, 1-14, 2011.
128.    Shokrolahi F, Yeganeh H, Mirzadeh H, Simple and Versatile Method for One-pot Synthesis of Segmented Poly(urethane urea)s via in situ Formed AB-type Macromonomers, Polym Int, 60, 620-629, 2011.
129.    Atefeh Solouk, Brian Cousins, Hamid Mirzadeh and Alexander Seifalian, Application of Plasma Surface Modification Techniques to Improve Haemocompatibility of Vascular Grafts: A Review, Biotechnology and Applied Biochemistry, 58, (5), 311–327 2011. 
130.    Shahriar Sharifi, Yousef Shafieyan, Hamid Mirzadeh, Shadab Bagheri-Khoulenjani, Sayed Mahmood Rabiee, Mohammad Imani, Mohammad Atai,Mohammad Ali Shokrgozar, Ali  Hatampoor,  Hydroxyapatite Scaffolds Infiltrated with Thermally Crosslinked Polycaprolactone Fumarate and  Polycaprolactone Itaconate, Journal of Biomedical Materials Research: Part A, 98A, 257–267, 2011.
131.    Mohammad. Farhadi, Hamid Mirzadeh, Atefeh. Solouk, Alimohamad. Asghari, Maryam. Jalessi, Hadi. Ghanbari, Parin Yazdanifard Collagen-Immobilized Patch for Repairing of Small Tympanic Membrane Perforations:  In Vitro and In Vivo Assays, , Journal of Biomedical Materials Research: Part A, 100A: 549–553, 2012.
132.    Mohamad Pezeshki Modaress, Hamid Mirzadeh, Mojgan Zandi,, Fabrication of a porous wall and higher interconnectivity scaffold comprising gelatin/chitosan via combination of salt-leaching and lyophilization methods, Iranian Polymer Journal, 21, 191-200, 2012.
133.    Farahmand Farhid, Imani Mohammad, Mirzadeh Hamid, Jolly Claude, Curing Behavior of Silicone Elastomer in the Presence of Two Corticosteriod Drugs, Journal of Biomedical Materials research, Part B- Applied Biomaterials,100B, 1636–1644, 2012.
134.    Marzieh Aliaghaie, Hamid Mirzadeh, Erfan Dashtimoghadam and Shahrouz Taranejoo, Investigation of Gelation Mechanism of an Injectable Hydrogel Based on Chitosan by Rheological Measurements for a Drug Delivery Application, Soft Matter, Soft Matter, 8, 7128-7137, 2012.
135.    Shadab Bagheri-khoulenjani and Hamid Mirzadeh Polystyrene surface modification using excimer laser and radio-frequency plasma: blood compatibility evaluations, Progress in Biomaterials,1 (1), 1-8, 2012.    
136.    Azadehsadat Hashemi Doulabi, Hamid Mirzadeh, Mohammad Imani, Nasrin Samadi, Chitosan/Polyethylene Glycol Fumarate Blend Film: Physical and Antibacterial properties, Carbohydrate Polymers, 92, 48-56, 2013.
137.    Farhadi M, Jalessi M, Salehian P, Farahmand Ghavi F, Emamjomeh H, Mirzadeh H, Imani M, Jolly C., Dexamethasone Eluting Cochlear Implant: Histological Study in Animal Model, Cochlear Implants International, 14, 45-50, 2013.
138.    Azadehsadat Hashemi Doulabi, Hamid Mirzadeh, Mohammad Imani, Miscibility Study of Chitosan/Polyethylene Glycol Fumarate Blends in Dilute Solutions, Journal of Applied Polymer Science, 127, 3514–3521, 2013.
139.    Azadehsadat Hashemi Doulabi, Hamid Mirzadeh, Mohammad Imani, Interaction and Miscibility study of Fumarate-based Macromers with Chitosan, Materials Chemistry and Physics, 139 515-524, 2013. 
140.    Shadab Bagheri-Khoulenjani, Hamid Mirzadeh, Particle Size Modeling and Morphology Study of Chitosan/Gelatin/Nanohydroxyapatite Nanocomposite Microspheres for Bone Tissue Engineering, Journal of Biomedical Materials Research, Part A, 101A,(6) 1758–1767, 2013.
141.    Erfan Dashtimoghadam, Hamid Mirzadeh, Faramarz Afshar Taromi, Bo Nyström, Microfluidic Self-Assembly of Polymeric Nanoparticles with Tunable Compactness for Controlled Drug Delivery, Polymer, 54, 4972–4979, 2013. 
ب) مقالات در کنفرانس‌های ملی و بین المللی  :
1.    Laser Induced Surface Grafting of Aam, HEMA and NVP onto PDMS, Proceedings of the First International and 8th National Congress of Chemistry and Chemical Engineering, p.13, Tehran, Iran, Sep. 1993.
2.    Laser Grafting of HEMA and NVP onto EPR-II, Proceedings of RadTech Asia’ 93 Radiation Curing Conference, pp. 661-666, Tokyo, Japan, 10-13 Nov. 1993.
3.    Laser Induced Surface Modification of PDMS as a Super- Hydrophobic Blood Compatible Material, Proceedings of RadTech Asia’ 95 Radiation Curing Conference, pp. 284-289,Guilin, China, 20-24 Nov. 1995.
4.    Preparation of a Blood Compatible Silastic Rubber by Laser Irradiation, Proceedings of the 8th Iranian Conference on Biomedical Engineering ICBME, Tehran, Iran, pp. 65-74, Dec. 1996.
5.    Effect of Laser Repetition Rate on the Surface Morphology of Polymers, Proceedings of 1st National Seminar on  Interaction of Laser Beams on Polymers, pp. 1-17, Tehran, Iran, 30 Apr.- 1 May 1997.
6.    A Review on Laser Induced Polymerization, Proceedings of 1st National Seminar on Interaction of Laser Beams on Polymers, pp. 55-69, Tehran, Iran, 30Apr.-1 May 1997.
7.    Modification of Polydimethylsiloxane Surface by Graft Polymerization of Acrylamide by Pulsed Laser Irradiation, Proceedings of 1st National Seminar on Interaction of Laser Beams on Polymers, pp. 107-125, Tehran, Iran, 30 Apr.-1 May 1997.
8.    Surface Modification Technologies X, the Institute of Materials, London. Ed. T. S. Sudarshan, Ed., T.S. Sudarshan, pp 256-264 1997.
9.    Laser Structuring to Improve Biocompatibility I: Surface Morphological Modification, Proceedings of the International Seminar on Polymer Science and Technology’ 97, pp.764- 769, Tehran, Iran, 3-5 Nov. 1997.
10.    Modification of Polydimethylsiloxane Surface by Graft Polymerization of Acrylamide with Pulsed Laser, Proceedings of the International Seminar on Polymer Science and Technology’97, pp.113-117, Tehran, Iran, 3-5 Nov. 1997.
11.    IR Laser Surface Modification of Polyethylene Terephthalate as Biomaterial, Proceedings of Processing and Fabrication of Advanced Materials VIII, pp., 221-229, Sep. 8-10, 1999.
12.    Determination of Crosslinking Density of Polydimethylsiloxane Network by Calorimetry, Proceedings of the 5th International Seminar on Polymer Science & Technology, p.402, Tehran, Iran, Sep. 2000.
13.    Synthesis Evaluation of Reactive-Urethane Prepolymer as Bioadhesive, Proceedings of the 5th International Seminar on Polymer Science & Technology, p.367, Tehran , Iran,  Sep. 2000.
14.    Cell Growth on the Laser Induced Acrylamide Grafted Polyethylene Terephthalate Film, Proceedings of the International Symposium on Polymeric Biomaterials and DDS, p. 73, Cheju, Korea, , Aug. 2000.
15.    Platelet Adhesion and Cell Growth on the Laser Surface Modified Polyethylene Terephthalate, Proceedings of the International Conference on Radiation and its Role on Diagnosis and Health, p.78, Tehran, Iran 18-20 Oct. 2000.
16.    Design and Manufacturing  of an Elastomeric Blend Based on PDMS/EPR as Insulating Composite, Proceedings of the 15 th International Power System Conference (PSC), pp. 211-222,Tehran, Iran, 6-8 Nov. 2000.
17.    Self Curving of Electrode Array by Polymer Surface Modification, Proceedings of the 6 th International Conference on Tactile Aids, Hearing Aids and Cochlear Implants, University of Exeter, Exeter, U.K, pp. 61-64, May 2000.
18.    Platelet Adhesion Study onto Three Different Types of Polydimethylsiloxane, Proceedings of the 5th International Seminar on Polymer Science & Technology, p.359, Tehran, Iran, Sep. 2000.
19.    Biocompatibility Evaluation of Hydrophilic and Hydrophobic Silicone Rubbers, Proceedings of the 5th International Seminar on Polymer Science & Technology, p.339, Tehran, Iran, Sep. 2000.
20.    Cell Behaviour Studies on the Excimer and CO2 Laser Surface Modified Polyethylene Terephtalate, Proceedings of the 14th International Conference on Surface Modification Technologies, Paris, France 11-13 Sep. 2000.
21.    Bulk and Surface Modification of Silicon Rubber for Biomedical Applications, Proceedings of PPS 2001 , Antalya , Turkey , 22-24 Oct. 2001.
22.    Radiation –Induced Surface Modification of Silicone Rubber and its Application in Cochlear Implant Systems, Proceedings of the 8th Symposium, Cochlear Implant in Children, p. 61, Universal City Hilton and Towers CA, USA, Feb.-Mar. 2001.
23.    Evaluation of the Polarity and Frictional Properties of Solid-Solid and Solid-Liquid on RTV Silicone Blend with Polyacrylic Acid as Superabsorbant, Proceedings of 6th National Congress on Chemical Engineering, pp. 97-104, Isfahan, Iran, 8-11 May 2001. 
24.    Conversion process of Natural Gas to Ethylene, Proceedings of 3rd Iran Petrochemical Forum (IPF) pp. 245-258, Tehran, Iran,5-6 May 2001. 
25.    “In vivo Study of Microcrystalline Chitosan as a Blood Hemostasis Agent, International Conference on Materials for Advanced Technologies (ICMAT 2001) Symposium B Biomaterials and Tissue Engineering, p.11, Singapore, 1-6 Jul. 2001.
26.    Laser Induced Surface Modification of Polydimethylsiloxane (PDMS) to Produce Three Different Types of Surfaces for Biomedical applications. Proceedings of RadTech Asia 2001 pp 471-478, Kunming, China, 15-19 May 2001.
27.    Manufacturing of Vascular Prosthesis Using Graphite Composites 1: Coating Technique of Vascular Prosthesis with Graphite, Proceedings of 10th Iranian Conference of Biomedical Engineering, pp. 1-7, Tehran, Iran, 31 Oct. 2001.
28.    Ultra High Molecular Weight Polyethylene (UHMWPE) and Polydimethylsiloxane (PDMS) Blends as Acetabular Cup Shock Absorber, Proceedings of 10th Iranian Conference of Biomedical Engineering, p. 47, Tehran, Iran, 31 Oct. 2001.
29.    Increase in Surface Polarity of a Buffer-Rinsed Biocomposite upon Prolongation of Rinse Time, Proceedings of 10th Iranian Conference of Biomedical Engineering, p 51, Tehran, Iran, 31 Oct. 2001.
30.    Adhesion Study of BHK Cells to the CO2 Pulsed Laser Treated PDMS Surfaces, in vitro Assay, Proceedings of the First National Conference on Lasers in Medicine and Biomedical Engineering, Tehran, Iran, pp. 27-36, 1-2 May 2002.
31.    Self- Positioning Segmented for Close Hugging of Modiolus, Proceedings of the First International Symposium on Cochlear Implant and Related Sciences, p. 42, Tehran, Iran 25-27 Apr. 2002.
32.    Application of Laser – Induced Polymerization in Modern Electrodes for Cochlear Implants, Proceedings of the First National Conference on Lasers in Medicine and Biomedical Engineering, pp. 110-117, Tehran, Iran, 1-2 May 2002. 
33.    Cartilage Tissue Engineering for Ear  Using Perforated Polyurethane Prosthesis, The International Journal of Artificial Organs, The Congress Issue, Vol. 25, No. 7, p. 680, 2002, the XXX ESAO Congress, Vienna, Austria, 28-31 Aug.  2002.  
34.    Effect of Polyvinyl Pyrrolidone (PVP) on the Polyether Sulfone (PES) Flat Sheet Hemodialysis Membrane, Proceedings of the 7th National Iranian Chemical Engineering Conference, 1, pp. 134-139, Tehran, Iran, 28-31 Oct. 2002. 
35.    Wettability Reduction of Silicone Rubber by Increasing surface porosity, Proceedings of the 1st National Conference on Polymer –Modified Bitumen and Their Applications, Tehran, Iran, 16-17 Dec. 2002.
36.    Experimental Kinetic Model of Oxidative Coupling of Methane Under Different Operation Condition Over Perovskite Catalyst, Proceedings of 12th Oil, Gas and Petrochemical Congress (Gas Conversion), International, Tehran, Iran, 23-24 Feb. 2003.
37.    Poly (vinyl alcohol)/ Chitosan Blend Film as a Biomaterial Proceedings of the 6th Iranian Seminar on Polymer Science and Technology (ISPST), p.158, Tehran, Iran, 12-15 May 2003. 
38.    A New Technique to Increase Chitin Deacetylation by Multistage Alkali Treatments, Proceedings of the  6th Iranian Seminar on Polymer Science and Technology (ISPST), p. 168, Tehran, Iran,  12-15 May 2003.
39.    Formulation of Polyisobutylene Based Adhesive for Wound Dressing Proceedings of the 6th Iranian Seminar on Polymer Science and Technology (ISPST), p. 325, Tehran, Iran, 12-15 May 2003. 
40.    Preparation of Porous Polyethylene for Maxillofacial Surgery Purposes: in vitro Proceedings of the 6th Iranian Seminar on Polymer Science and Technology (ISPST) p.166, Tehran, Iran, 12-15 May 2003. 
41.    Effect of Surface Treatment of Polyester Vascular Grafts with Polyethylene- Imine on its Adhesion to Graphite, Proceedings of the 6th Iranian Seminar on Polymer Science and Technology (ISPST), p.164, Tehran, Iran, 12-15 May 2003. 
42.    Adhesion of modified to unmodified PDMS layers and its applications in modern prosthesis, Proceedings of the 6th Iranian Seminar on Polymer Science and Technology (ISPST), p.167, Tehran, Iran, 12-15 May 2003. 
43.    Ultrasound Gel Pad Produced by Freezing/Thawing of PVA/Water Solution Proceedings of the 6th Iranian Seminar on Polymer Science and Technology (ISPST), p.118, Tehran, Iran, 12-15 May 2003. 
44.    Manufacturing and evaluation of silicone-EPDM blends used in housing of high voltage composite insulators, Proceedings of the 17th International Conference and Exhibition on Electricity  Distribution ( CIRED), Barcelona, Spain  12-15 May 2003.
45.    Comparative Study of Home Made Tube Grafts (GCPVG) and Gel- Sealed Type, Proceedings of  the Third Iranian Society for Cardiac Surgery (ISCS), Oral- 15 ,Tehran, Iran, 23-26-Sep.-2003.
46.    Effectiveness of Persian Gulf Chitosan (PGC) Application for Sealing Arterial puncture Sites, Proceedings of the Third Congress of Iranian Society of Cardiac Surgeons, Oral -25, Tehran, Iran , 23-26 Sep. 2003.
47.    In vitro and in vivo Hemocompatibility Evaluation of Graphite Coated Polyester Vascular Grafts,The International Journal of Artificial Organs, The Congress Issue, Vol. 26, No. 7, p.592, 2003, the XXX ESAO Congress, Aachen, Germany 3-6 Sep. 2003.
48.    Biocompatibility Evaluation of Graphite Coated Polyester Vascular Grafts , In vitro Assay, Proceedings of Chemical Engineering Congress , The Eight Iranian National, p 98, Mashhad, Iran, 21-23 Oct. 2003.
49.    Characterization of Heat Treated PES-PVP Hemodialysis Membrane by Ultrafiltration and Atomic Force Microscopy, Proceedings of  the Fifth International Membrane Science and Technology, pp 25-30, Sydney , Australia, 10-14 Nov.2003.
50.    Preparation and Evaluation of Physic

پر بازدیدترین اخبار دانشگاه

اخبار روزنامه ها

خبرنامه - شبکه های اجتماعی

آمار سایت